GBP
  • GBP
  • USD
  • EUR

Factory-Direct Custom RFID Labels

From 100 pcs to 1M+, we design and manufacture bespoke RFID labels with fast lead times, factory-direct pricing and full UK support.

Start Custom
Download Brochure

Why Custom RFID Labels

Most RFID failures come from using the wrong size, antenna or material.

A customised tag ensures correct read range, better durability and lower total cost, so you buy only what your application actually needs.

Right Size, Right Performance

Small adjustments to size, antenna tuning or material can increase read range by 30–50%

Lower Waste, Lower Unit Cost

A custom label avoids mis-reads, drop-offs and re-tagging, reducing operational losses and keeping your unit cost predictable and stable.

Built Exactly for Your Environment

Metal surfaces, liquids, heat, laundry processes or tight spaces — a tailored design ensures long-term stability and extends your tag lifespan.

Every Layer Customisable — Built Around Your Project Needs

What You Can Customise

Face Material

We offer a broad set of face material options to match durability, printability and environmental demands, such as Paper, PET, PP, Synthetic film and more. Finishes such as matte, gloss, UV-protected or scratch-resistant coatings can also be added, allowing the label to achieve both functional and aesthetic objectives.

Adhesive Layer

Depending on the application, it can be formulated as a permanent adhesive for long-term attachment, a removable adhesive for temporary tagging, or a high-bond industrial adhesive for difficult surfaces. For challenging use cases such as metal surfaces or curved packaging, specialised adhesive formulations are available to provide reliable bonding and stability.

Antenna

We develop custom antenna geometries tailored to the environment in which the label will be deployed, considering factors such as reader model, antenna polarity, scanning orientation, substrate material, and expected read distance. Each antenna can be tuned specifically for ETSI or FCC frequency bands, ensuring compliance and optimal sensitivity across the required region.

Chip

We support a complete portfolio across all major chip manufacturers, allowing each project to select the most appropriate IC for its technical and operational requirements. Encoding can be fully customised, including EPC programming, TID association, access and kill password setup, user memory configuration and secure element initialisation.

Functional Base Layer

The functional base layer can be configured using PET, foam, ferrite, PCB or ceramic depending on environmental demands. PET thickness can be selected from 25 to 100 microns, with flexible or rigid structures adapted to your application.

Encoding and printing

We provide complete flexibility in EPC encoding, user memory allocation, TID association, password configuration and security management. We support high-resolution artwork, brand elements, barcodes, QR codes, human-readable serial numbers, laser marking, UV security marks and tamper-evident identifiers

Why us

Why Partners Choose Us

01.

Custom Antenna Design & Performance Tuning

We design and tune antennas around your read distance, scanning orientation, hardware model and environmental conditions.
Our engineers use Voyantic Tagformance and anechoic chamber measurements to refine each prototype until it meets the performance target.

02.

IC Options Across All Major Chipmakers

We customise tags using Impinj, NXP, Alien, EM and other leading ICs, ensuring compatibility with every system architecture.
Dual-frequency (HF + UHF) and dual-IC configurations are fully supported.

03.

Material & Structure Engineering

We build for the real installation environment:

  • On-metal / anti-metal structures
  • Liquid environments（bottles, test tubes, blood bags）
  • High-temperature and autoclave cycles 121°C+
  • Ultra-thin constructions <0.2 mm
  • Foam, ferrite, epoxy, silicone, TPU, fabric, PP, PET, PCB, ceramic
  • Long-range soft inlay + industrial housings
03.

Prototype-to-Production Workflow

From first prototype to stable volume production, we support your entire deployment:

  • Engineering consultation
  • Antenna tuning
  • Sample production
  • Field validation with your readers
  • Pilot run
  • Full mass production with QA

Our Custom Development Process

1. Requirement Discussion

We analyse environment, mounting surface, reader model, target read distance and compliance needs.

2. Engineering Proposal

Antenna options, material stack-up, IC selection and expected performance.

3. Prototype & Tuning

Multiple antenna versions are produced and tested using Voyantic and chamber measurements.

4. Field Validation

Samples are tested with your readers in real operating conditions. We refine the design until performance is stable.

5. Pilot Run

A small production batch (1–5k pcs) verifies quality and consistency.

6. Mass Production

Full-scale production with batch QA, encoding and packaging based on your project workflow.

Frequently Asked Questions

Yes, we specialise in fully custom RFID development. We engineer antennas, materials, IC selection, adhesive structures and encoding to match your project requirements, particularly for environments where standard off-the-shelf labels do not perform reliably.

We accept very low MOQs for engineering and validation phases. Small custom batches from 50–200 pcs are possible for prototyping, with larger quantities available once the design is finalised.

Most custom prototypes can be produced within 3–7 working days, depending on antenna complexity and material requirements. If multiple antenna versions are required for tuning, we typically provide them within the same timeframe.

Yes. For complex environments—such as metal surfaces, liquids, curved plastics or long-range applications—we often produce several antenna designs in parallel to accelerate the tuning and validation process.

Yes, we frequently work under NDAs. Many system integrator and OEM projects involve confidential information, and we are fully comfortable working within formal confidentiality frameworks.

We typically require details such as the installation surface, reading environment, reader/antenna model, preferred frequency band (ETSI or FCC), target read distance, temperature or pressure constraints, and any mechanical restrictions such as thickness or label size.

We support all major UHF and HF chip families, including Impinj (M730/M750/M700 series), NXP UCODE (7/8/9/DNA), Alien H9/H10, EM Micro (4423/4425), and HF chips such as MIFARE, NTAG and ICODE. Dual-frequency (HF + UHF) designs are also available where required.

Yes, we design and tune antennas for both ETSI (865–868 MHz) and FCC (902–928 MHz) regions. We can also optimise designs for other national bands and deliver region-specific performance if your system operates globally.

Standard lead time is 7–10 working days after prototype approval. Larger or highly complex projects may require additional time, but we aim to maintain stable and predictable production schedules.

Yes. Every batch passes through our quality assurance process, including Voyantic Tagformance testing, visual inspection, electrical verification, and sampling for performance consistency. Full documentation can be provided if required.

Factory Strength & Capabilities

Manufacturing at Scale

  • 200M+ annual RFID tag capacity
  • 2,500 sqm ISO-certified facility
  • 200-person engineering & production team
  • 18+ years manufacturing experience

Quality & Compliance

  • CE, RoHS, REACH, ISO9001, ISO14001
  • Every batch verified using Voyantic testing
  • Full traceability from antenna to encoding

Rapid Delivery

  • Samples: 3–7 working days
  • Standard production: 7–10 working days
  • UK warehouse support for faster dispatch
Scroll to Top